Warning: include(http://klahost.com/floating-banner/melbourne.php): failed to open stream: HTTP request failed! HTTP/1.1 404 Not Found in /home/qtaustra/public_html/wp-content/themes/breezing/header.php on line 83

Warning: include(): Failed opening 'http://klahost.com/floating-banner/melbourne.php' for inclusion (include_path='.:/opt/php54/lib/php') in /home/qtaustra/public_html/wp-content/themes/breezing/header.php on line 83
post by | | 0

1 Series Corners

Internal Corners
QT FullMesh
(AS-3.1.B)

Panel to Wall Sheet Junction
(AS-3.6.B)

External Corners
Corner Bead
(AS-3.2.C)

 

Horizontal Expansion Joint
(AS-3.3.C)

Note
All panel fixings to be 10g x 75mm class 3 screws or 75 x 3.15 ø or 3.75 ø class 3 ring shank nails with QT Buttons at 225mm centres as per technical manual section 2. Batten fixings should be class 3 and as section 2 of the technical manual.

Vertical Expansion Joint
(AS-3.4.B)

Panel to Brick Junction
(AS-3.7.B)

Note
All panel fixings to be 10g x 75mm class 3 screws or 75 x 3.15 ø or 3.75 ø class 3 ring shank nails with QT Buttons at 225mm centres as per technical manual section 2. Batten fixings should be class 3 and as section 2 of the technical manual.

Panel Upper Storey to Brick Lower Storey Junction
(AS-3.8.C)

Note
All panel fixings to be 10g x 75mm class 3 screws or 75 x 3.15 ø or 3.75 ø class 3 ring shank nails with QT Buttons at 225mm centres as per technical manual section 2. Batten fixings should be class 3 and as section 2 of the technical manual.

find out more